rr series relays e-18 www.idec.com usa: (800) 262-idec or (408) 747-0550, canada: (888) 317-idec e relays key features of the rr series include: high reliability and long service life ? vailable in octal (8- and 11-pin) or square (11-blade) base options include check button for test operation, indicator light, and side ?nge (contact idec for diodes) din rail, surface and panel type sockets available for a wide range of mounting applications specifications contact material silver contact resistance 30m ? maximum (initial value) minimum applicable load 24v dc/10ma, 5v dc/20ma (reference value) operating time 25ms maximum release time 25ms maximum maximum continuous applied voltage (ac/ dc) at 20? 110% of the rated voltage minimum operating voltage (ac/dc) at 20? 80% of the rated voltage drop-out voltage (ac) at 20? 30% of the rated voltage drop-out voltage (dc) at 20? 15% of the rated voltage power consumption ac: approximately 3va (50hz), 2.5va (60hz) dc: approximately 1.5w insulation resistance 100m ? minimum (measured with 500v dc megger) dielectric strength pin (rr2p, rr3pa) between live and dead parts: 1,500v ac, 1 minute between contact circuit and operating coil: 1,500v ac, 1 minute between contact circuits: 1,500v ac, 1 minute (1,000v ac between no-nc contacts) blade (rr1ba, rr2ba, rr3b) between live and dead parts: 2,000v ac, 1 minute between contact circuit and operating coil: 2,000v ac, 1 minute between contact circuits: 2,000v ac, 1 minute between contacts of same polarity: 1,000v ac, 1 minute frequency response 1,800 operations/hour temperature rise coil: 85? maximum contact: 65? maximum vibration resistance 0 to 6g (55hz maximum) shock resistance 100n (approximately 10g) life expectancy electrical: over 500,000 operations (120v, 50/60hz, 10a) mechanical: over 10,000,000 operations operating temperature ?0 to +70? weight rr2p: 90g, rr3pa: 96g (approximately) rr1ba/rr2ba/rr3b: 82g (approximately) rr series general purpose power relays order standard voltages for fastest delivery. allow extra delivery time for non-standard voltages. ul recognized file no. e66043 csa certi?d file no. lr35144 * pin style only file no. b020813332452* * pin style only (does not apply to blade style) * ordering information rr3pa-u ac120v basic part no. coil voltage:
relays rr series www.idec.com usa: (800) 262-idec or (408) 747-0550, canada: (888) 317-idec e-19 e relays part numbers: rr series with options coil ratings contact ratings part numbers: sockets termination contact configuration basic part no. indicator light check button light and check button side flange p, pa (pin) dpdt rr2p-u rr2p-ul rr2p-uc rr2p-ulc 3pdt rr3pa-u rr3pa-ul rr3pa-uc rr3pa-ulc b, ba (blade) spdt rr1ba-u rr1ba-ul rr1ba-uc rr1ba-ulc rr1ba-us dpdt RR2BA-U RR2BA-Ul RR2BA-Uc RR2BA-Ulc RR2BA-Us 3pdt rr3b-u rr3b-ul rr3b-uc rr3b-ulc rr3b-us rated voltage rated current ?5% at 20? coil resistance ?0% at 20? inrush current inductance 60hz 50hz energizing de-energizing ac 6v 420ma 490ma 4.9 ? 720ma 0.04h 0.02h 12v 210ma 245ma 18 ? 365ma 0.15h 0.08h 24v 105ma 121ma 79 ? 182ma 0.57h 0.32h 120v 20.5ma 24ma 2100 ? 35ma 15h 8.2h 240v 10.5ma 12.1ma 8330 ? 18ma 57h 32h dc 6v 240ma 25 ? n/a 12v 120ma 100 ? 24v 60ma 400 ? 48v 30ma 1600 ? 110v 13ma 8460 ? resistive inductive motor load voltage nominal ul csa nominal ul csa ul 30v dc 10a 10a 10a 7.5a 7a 7.5a 110v dc 0.5a 0.3a 0.5a 120v ac 10a 10a 10a 7.5a 7.5a 7.5a 1/4 hp 240v ac 7.5a 10a 10a 5a 7a 7a 1/3 hp relays standard din rail mount finger-safe din rail mount panel mount springs & clips (optional) part numbers use with socket rr2p sr2p-05 sr2p-06 sr2p-05c sr2p-51 sr2b-02f1 sr2p-05, -05c, -06 sr3p-01f1 sr2p-51, sr3p-51 rr3pa sr3p-05 sr3p-06 sr3p-05c sr3p-51 sr3b-02f1 sr3p-05, -05c, -06 sr3b-05, -51 sr3p-01f1 sr3p-51 rr1ba rr2ba rr3b sr3b-05 sr3b-51 sr3b-02f1 sr3b-05 sr3b-51 part numbers 1. rr1ba, rr2ba, and rr3pa are u.s. standard terminal arrangements. 2. for diode option on dc coils please consult factory. ratings inductive load: cos ? = 0.3, l/r = 7ms. applicable sockets see section f for details on sockets. all din rail mount sockets listed can be mounted using din ra il bndn1000.
rr series relays e-20 www.idec.com usa: (800) 262-idec or (408) 747-0550, canada: (888) 317-idec e relays internal circuits 5 2 7 b a (-) (+) 1 2 6 5 7 8 4 3 (+) (-) 1 2 6 57 8 4 3 (+) (-) 9 10 11 rr2p rr3pa rr1ba 4 1 7 b a (-) (+) rr2ba 6 3 9 4 1 7 b a (-) (+) rr3b 6 3 9 5 2 8 image as viewed from bottom of relay. refer to socket for exact wiring layout (section f) . electrical life curves 012345678910 10 50 100 500 1000 ac 110v resistive ac 220v inductive ac 220v resistive ac 110v inductive load current (a) life (x 10,000) operations 012345678910 10 50 100 500 1000 dc 30v resistive dc 100v inductive dc 100v resistive dc 30v inductive load current (a) life (x 10,000) operations maximum switching capacity 10.0 5.0 1.0 0.5 1510 50 100 200 300 load current (a) load voltage (v) dc resistive dc inductive ac resistive ac inductive
relays rr series www.idec.com usa: (800) 262-idec or (408) 747-0550, canada: (888) 317-idec e-21 e relays dimensions 8-pin rr2p 11-pin rr3pa note : dimensions in [ ] include hold-down spring. blade rr1ba, rr2ba, rr3b side flange rr1ba-us, RR2BA-Us, rr3b-us 5 123 6 4 789 ab 47.5 max. 0.5 7.3 dimensions in the ( ) include a hold-down spring. 36 36 sr3b-05: 73 (76) max., sr3b-51: 56 (60) max. total length from panel surface including relay socket 4.7 3.0 ?.0 oblong hole 4.2 16.0 73.5 47.5 max. 16.1 4.7 11.1 11.1 63.5 7.3 63.5 36 36 3.0 ?.0 oblong hole 2-?.5 mounting holes 5 123 6 4 789 ab 0.5 dimensions in the ( ) include a hold-down spring. 55.5 max. 9.9 13 35.6 35.6 sr3p-05: 84.5 (87.5) max., sr3p-51: 63 (68) max. to tal length from panel surface including relay socket 11 10 9 8 7 6 5 4 3 2 1 55.5 max. sr2p-05: 84.5 (87.5) max., sr2p-51: 63 (68) max. t otal length from panel surface including relay socket dimensions in the ( ) include a hold-down spring. 9.9 13 28.6 35.6 1 2 3 45 6 7 8 all dimensions in mm.
|
